!WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
Trouble Shooting
TROUBLE |
| PROBABLE CAUSE |
| SUGGESTED REMEDY | |
|
|
|
| ||
1. Fan will not start. | 1. Fuse or circuit breaker blown. | 1. | Check main and branch circuit fuses or circuit | ||
|
|
|
| breakers. | |
| 2. | Loose power line connections to the fan, or loose | 2. | Check line wire connections to fan and switch | |
|
| switch wire connections in the switch housing. |
| wire connections in switch housing. | |
|
|
| ! WARNING: Make sure main power is | ||
turned |
|
|
| off. | |
| 3. | Reversing switch in neutral position. | 3. | Make sure reversing switch position is all the | |
|
|
|
| way to one side. | |
|
|
|
| ||
2. Fan sounds | 1. Blades not attached to fan. | 1. | Attach blades to fan before operating. | ||
noisy. | 2. Loose screws in motor housing. | 2. | Check to make sure all screws in motor | ||
|
|
|
| housing are snug (not | |
| 3. | Screws securing fan blade holders to motor | 3. | Check to make sure the screws which attach | |
|
| are loose. |
| the fan blade holders to the motor are tight. | |
| 4. | Wire connectors inside switch housing rattling. | 4. | Check to make sure wire connectors in | |
|
|
|
| switch housing are not rattling against each | |
|
|
|
| other or against the interior wall of the switch | |
|
|
|
| housing. | |
|
|
| ! WARNING: Make sure main power is | ||
turned |
|
|
| off. | |
|
|
|
| ||
3. Fan wobbles | 1. Setscrew in motor mount adapter is loose. | 1. | Tighten setscrew in motor mount adapter. | ||
or shakes | 2. | Setscrew in hanger ball/downrod assembly is | 2. | Tighten the setscrew in the hanger ball/ | |
excessively. | |||||
| loose. |
| downrod assembly. | ||
|
|
| |||
| 3. | Screws securing fan blade flanges to motor | 3. | Check to be sure screws which attach the fan | |
|
| are loose. |
| blade flanges to the motor are tight. | |
| 4. | Fan blade flanges are not seated properly. | 4. | Check to be sure the fan blade flanges seat | |
|
|
|
| firmly and uniformly to the surface of the | |
|
|
|
| motor. If flanges are seated incorrectly, loosen | |
|
|
|
| the holder screws and retighten. | |
| 5. | Hanger bracket and/or ceiling outlet box is not | 5. | Tighten the hanger bracket screws to the outlet | |
|
| securely fastened. |
| box, and/or secure outlet box. | |
| 6. | Fan blades are out of balance. | 6. | Interchanging an adjacent | |
|
|
|
| pair can redistribute the weight and result in | |
|
|
|
| smoother operation. | |
|
|
|
|
|
5