BP7369 Vienne 12/7/08 5:21 PM Page 6

3. Carefully position a M5 x 18mm oval head screw in one flange hole and loosely tighten the screw (Figure 2). Install the second screw in the same manner and securely tighten both screws. Repeat steps 2 and 3 for the remaining four blade assemblies.

NOTE: Take care not to scratch the fan housing when installing the blade assemblies.

4. Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 3). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 10.

PIN

HANGER

BALL

DOWNROD

SETSCREW

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrews securely tightened. Failure to verify that the pin and setscrews are properly installed (as shown in Figure 4) could result in the fan falling.

DOWNROD

 

CLEVIS

HAIRPIN

PIN

CLIP

 

MOTOR

MOTOR AND

COUPLING

UPPER

 

HOUSING

 

ASSEMBLY

 

SETSCREW (2)

REMOVE THREE M4 x 15mm

PAN HEAD SCREWS AND

RUBBER WASHERS

Figure 4

6. Tighten the two setscrews (Figure 4)

Figure 3securely while pulling up on the downrod.

5. Unscrew the two setscrews (Figure 4) until they clear the inside of the motor coupling. Then separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 4). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull up on the downrod to make sure the clevis pin is properly installed.

7.Remove and retain three M4 x 15mm pan head screws and rubber washers from the motor and upper housing assembly (Figure 4).

8.Place the upper housing ring on the motor and upper housing assembly. Line up the three holes in the upper housing ring with the three threaded holes in the motor and upper housing assembly (Figure 5). Reinstall a M4 x 15mm pan head screw and rubber washer in each of the holes (Screws and rubber washers were removed in Step 7).

6

U.L. Model No.: CF725

Page 5 Page 7
Page 6
Image 6
Emerson CF725GBZ00, CF725GES00 owner manual Tighten the two setscrews Figure
Page 5 Page 7

CF725GBZ00, CF725GES00 specifications

The Emerson CF725GES00 and CF725GBZ00 are two exceptional ceiling fan models that exemplify the perfect blend of performance, aesthetics, and innovative technology. Both models are designed for optimal air circulation while enhancing the visual appeal of any room interior.

One of the standout features of the Emerson CF725 series is its powerful yet quiet motor. The high-performance motor ensures efficient airflow at various speed settings, making it suitable for year-round use. With multiple speed options, users can customize their comfort level depending on the season—providing a cool breeze during hot summer months and a gentle air circulation in winter.

The construction of both models focuses on durability and longevity. Made with high-quality materials, the fans are engineered to withstand the test of time. The blades are crafted from solid wood for the CF725GES00 and a composite material for the CF725GBZ00, ensuring they deliver optimal air movement without compromising on style. Both options feature a sleek, modern design that seamlessly integrates with a wide range of home décors.

Emerson's commitment to energy efficiency is reflected in these models as well. The CF725 series comes equipped with advanced technology that allows users to save on their energy bills. The fans can operate at low energy consumption levels, making them an eco-friendly choice for homeowners. Moreover, the fans are designed to work harmoniously with heating and cooling systems, effectively helping to maintain a stable temperature in the room.

Installation is straightforward with the CF725 series, featuring a versatile mounting system that accommodates both standard and angled ceilings. Additionally, the fans are compatible with various remote control and wall control options, providing added convenience for users.

Another impressive characteristic is the fan’s customizable lighting features. The CF725GES00 model offers integrated LED lights, while the CF725GBZ00 can accommodate an array of light kits, allowing homeowners to choose the best lighting solutions to suit their needs.

In summary, the Emerson CF725GES00 and CF725GBZ00 ceiling fans are remarkable products distinguished by their robust performance, stylish designs, energy efficiency, and user-friendly features. They cater to diverse preferences while ensuring comfort and elegance, making them ideal additions to any living space.
Top Page Image Contents