SLEEP TO MUSIC TIMER

You can program the Sleep Timer to play the radio for up to 99 minutes and then shut off automatically.

1.) Depress the SLEEP button. The display will show “L 30”, the radio will turn on, play for 30 minutes and then turn off automatically.

2.) To adjust the length of the Sleep Timer depress and hold the SLEEP button, and repeatedly press either the UP or DOWN buttons until the display shows the desired Sleep time. You can select between 1 minute and 99 minutes.

Note: When you change the length of the Sleep Timer setting, the new setting becomes the default setting.

For example, if you change the Sleep Timer from 30 minutes to 45 minutes, the default setting will become 45 minutes. The next time you press the SLEEP button the Sleep Timer will start at 45 minutes. However, if the power is interrupted and the back up battery is not installed, the Sleep Timer will return to the original 30-minute deafult setting.

3.) When the Sleep Timer counts down to “00” the radio will shut off automatically.

To cancel the Sleep Timer operation and shut the radio off before the Sleep Timer counts down to “00”, press the SNOOZE button at any time.

IMPORTANT: Remember that the radio station and volume settings that you choose for Sleep To Music operation are the same settings you will hear if you set the alarm for Wake To Radio the following morning.

DIMMER CONTROL

The DIMMER control was set to the ‘HIGH’position at our factory. If you find the clock display is too bright in a darkened room, set the Dimmer control to the ‘LOW’ position.

15

CK5038_032404.p65

15

24/3/2004, 11:27

Page 16
Image 16
Emerson CK5038 owner manual Sleep to Music Timer, Dimmer Control