5.

Press the MODE button; the hour will appear.

 

 

 

 

6.

Press the SET button to set the hour. Be sure to set correctly AM or PM.

 

 

 

 

7.

Press the MODE button; the minutes will appear.

 

 

 

 

8.

Press the SET button to set the minute.

MODE

SET

MODE

SET

9.

Press the MODE button, then the SET button and the normal clock operation will begin.

 

 

 

TO AUTOMATICALLY CYCLE BETWEEN CLOCK AND DATE

To have the unit automatically cycle between the time and date every two (2) seconds, follow the steps below:

1.Press the MODE button once, the display will alternately show the time or date every two (2) seconds.

2.To cancel, press the SET button once and the seconds will appear. Continue pressing the MODE button until the time appears.

TO MANUALLY CYCLE BETWEEN CLOCK, DATE AND SECOND

To manually cycle between the time, date and seconds, follow the steps below:

1.Press the SET button once and the date will appear.

2.Press the SET button again within two (2) seconds and the seconds will appear. If the SET button is not pressed within two (2) seconds, the display will revert to the time.

3. Press the SET button again to return to normal clock operation.

TO LISTEN TO THE RADIO

1.

Rotate the ON/OFF Volume control clockwise to turn the unit on.

 

2.

Rotate the Band switch to select AM or FM.

(OK)

3.

Tune an AM or FM station by turning the Tuning control.

 

4.

Adjust the Volume control as desired.

 

5.

To turn the radio off, rotate the ON/OFF Volume control counter-clockwise until

 

 

a click is heard.

 

ANTENNAS

(NO)

This radio has built in AM and FM antenna which should provide satisfactory reception in most area.

PROPER PLACEMENT OF YOUR SHOWER RADIO

You can use the built in hanger hook to hang the radio from the shower pipe or from the shower curtain rod. The radio will not be affected by moisture, steam, or occasional splashing, but it should not be placed in the direct path of the shower spray, and it should never be fully immersed in water.

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

LIMITED WARRANTY

Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $5.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. Send your unit to:

Emerson Radio Corp.

1901 Diplomat Drive,

Farmers Branch, TX 75234.

1-800-898-9020

This warranty does not cover damage from negligence, misuse, abuse, accident, failure to follow operating instructions, commercial use, rental, repairs by an unauthorized facility, or products purchased, used, serviced or damaged outside of the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU898H

Part No.: 16-2835

109-01

Printed in China

Page 2
Image 2
Emerson CK5888 manual To Automatically Cycle Between Clock and Date, To Manually Cycle Between CLOCK, Date and Second

CK5888 specifications

The Emerson CK5888 is a cutting-edge industrial temperature controller designed to provide precise monitoring and control in various applications, enhancing operational efficiency and reliability. With its robust features, advanced technologies, and user-centered design, the CK5888 is an ideal choice for industries that require accurate temperature management.

One of the standout features of the Emerson CK5888 is its dual display, which allows for simultaneous viewing of both setpoint and process temperature. This functionality improves user convenience by facilitating real-time monitoring without necessitating constant switching between screens. Additionally, the controller boasts a clear and intuitive graphical interface that simplifies configuration and reduces setup time for operators.

The CK5888 utilizes advanced PID control technology that enables precise temperature regulation, minimizing fluctuations and ensuring consistent performance. PID control is enhanced through Emerson's Adaptive Tuning feature, which automatically adjusts control parameters to adapt to changes in the system dynamics. This results in optimized performance and energy savings, making the CK5888 a cost-effective solution for enterprises.

Another significant characteristic of the Emerson CK5888 is its versatility. It supports multiple input types, including thermocouples and resistance temperature detectors (RTDs), making it suitable for a wide range of temperature sensing applications. The controller also features multiple output options, such as relay, SSR, and analog outputs, allowing it to integrate easily into existing systems.

The Emerson CK5888 emphasizes reliability and durability with its industrial-grade construction, designed to withstand harsh environments. It is equipped with advanced diagnostic capabilities that provide real-time monitoring and easy troubleshooting. Users can access error codes, alarms, and historical data logs, enabling quick identification of issues and minimizing downtime.

In terms of connectivity, the CK5888 supports communication protocols such as Modbus RTU, facilitating seamless integration into larger control systems and enhancing its adaptability to various industrial automation environments. Its compatibility with various communication standards ensures that it can fit into numerous setups without compatibility concerns.

In summary, the Emerson CK5888 temperature controller stands out for its dual display, advanced PID control with Adaptive Tuning, versatility in input and output options, and robust industrial-grade design. Its focus on user-friendliness and connectivity further consolidates its position as a vital tool for industries reliant on precise temperature management. Whether in food processing, pharmaceuticals, or manufacturing, the CK5888 delivers exceptional performance, making it an excellent investment for ensuring operational efficiency and product quality.