Emerson CKD1137 owner manual Setting The Wake Up Times

Setting The Wake Up Times

The unit has two separate wake up alarms that can be set and used independently.

1.) Press the ALARM 1 or ALARM 2 button once. The display will change from the respective time of the day to wake up time and begin flashing.

The AL. 1 or AL. 2 indicator comes ‘On’.

2.) Press the HR. button to set the wake up hour. Set correctly for AM or PM.

Press the MIN. button to set the minute correctly.

3.) Press the respective ALARM button once. The Alarm time is set.

The display returns to correct time.

PROGRAM REPEAT RANDOM POWER	FM ST.
PM
AL. 1	AL. 2

PROGRAM REPEAT RANDOM POWER	FM ST.
PM
AL. 1	AL. 2

Notes:

•After you press the ALARM 1 or ALARM 2 button, you must press the

HR. or MIN. buttons to adjust the alarm time within 5 seconds, while the alarm display is still flashing. After 5 seconds the alarm time stops flashing and the display returns to the correct time. If this occurs, press the desired Alarm button again until the alarm time display begins flashing and make your alarm time adjustments while the display is flashing.

•After you have adjusted the wake-up time the alarm is set automatically. The AL1 and/or AL2 indicators will be ‘On’. To deactivate the alarms press the ALARM 1 and/or ALARM 2 buttons once. The AL1 and/or AL2 indicators will go ‘Off’.

10

CKD1137_053105.p65 10

1/6/2005, 14:22