Emerson CKD2300 owner manual Setting The Wake-Up Times

Setting The Wake-Up Times

The procedure for setting the Alarm 1 and Alarm 2 wake up times is the same.

1.) Slide the ALARM 1 switch, located on the left side of the cabinet to the “SET” position.

ALARM 1

The display changes from the correct time to the Alarm 1 wake-up time. The first time you set the Alarm 1 or Alarm 2 wake-up time the display will flash “12:00” (AM).

PM

AL 1

AL 2

2.) Press the SKIP/ SEARCH / HOUR button to set the display to the desired Alarm 1 wake-up hour, AM or PM. If the PM indicator is ‘Off’the wake-up hour displayed is AM.

3.) Press the SKIP/SEARCH / MIN. button to adjust the display to the desired Alarm 1 wake-up minute.

4.) Slide the ALARM 1 switch back to the “OFF” position. The display changes from the Alarm 1 wake-up time back to the correct time.

5.) Follow the same procedure to set the Alarm 2 wake-up time if desired.

To check the wake-up times just slide the ALARM 1 or ALARM 2 button to the “SET” position at any time. Slide the switches back to the “OFF” position to return to the correct time.

Note: If both of the Alarm switches are set to “SET” at the same time the clock will display the correct current time, not the Alarm 1 or Alarm 2 wake up time.

So be sure to set the ALARM 1 switch back to the “ON” or “OFF” position before setting the ALARM 2 switch to the “SET” position.

10

CKD2300_060305.p65 10

3/6/2005, 11:04