Changing each setting in PW SNR mode | Toshiba IK-TF7C instruction

(1. 3. 3) Changing each setting in PW SNR mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SNR
TRG.P
TRG.P
PART	OFF

<MODE = E.TRG E.TRG = PW SNR>

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Partial scanning switch OFF/60fps/90fps/E.60fps/E.90fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either

, by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/60fps/90fps/E.60fps/E.90fps by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

16

Image 16

Toshiba IK-TF7C instruction manual Changing each setting in PW SNR mode, Mode = E.TRG E.TRG = PW SNR

Contents

For Customer Use Following information is only for EU-member states Safety Precautions Avoid setting in humid, smoky, vaporized or dusty places Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selections Preset value Names and Functions Connection Connector Pin AssignmentsStandard Connection Operation White BalanceAutomatic White Balance Manual White Balance Outline Result displayed Meaning Shutter speed mode is E.TRG mode GainShading Correction OFF Mode Setting by on Screen Display Using the Menus Changing each setting in Manu mode Partial scanning settingMenus Shutter Electronic shutter Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SR mode Mode = E.TRG E.TRG = PW SR Changing each setting in RR mode Mode = E.TRG E.TRG = RRChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing the shading correction mode Changing the manual shading correction settingChanging master pedestal Changing R pedestal Adjusting horizontal phase SyncOption Data UP, Down Menu UP, Down Setting to factory setting status External sync signal polarityShutter mode HD input VD input External Sync Setting by the frame Using the unit with external sync signalSetting by 1H Horizontal phase adjustment 1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingEXT Trig External trigger Fval Lval Dval Ger, there will be an effect on the video 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Input Timing Chart Example RR Reset restartLong Term Exposure When Partial Scanning Mode is on Partial ScanningPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins Horizontal Output Waveform Timing Chart CCD Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCD Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division