Changing each setting in PW SR mode | Toshiba IK-TF7C specification

(1. 3. 4) Changing each setting in PW SR mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SR
TRG.P
TRG.P
PART	OFF

<MODE = E.TRG E.TRG = PW SR>

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity Input trigger pulse : negative polarity

•Partial scanning switch OFF/60fps/90fps/E.60fps/E.90fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

Page 17

Image 17

Toshiba IK-TF7C instruction manual Changing each setting in PW SR mode, Mode = E.TRG E.TRG = PW SR

Contents

Following information is only for EU-member states For Customer Use Safety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty places Table of Contents Components Available selections Preset value Items Controlled by Using on Screen Display Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed Meaning Gain Shutter speed mode is E.TRG modeShading Correction OFF Using the Menus Mode Setting by on Screen Display Partial scanning setting Changing each setting in Manu modeMenus Shutter Electronic shutter Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Mode = E.TRG E.TRG = RR Changing each setting in RR modeChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing the manual shading correction setting Changing the shading correction modeChanging master pedestal Changing R pedestal Sync Adjusting horizontal phaseOption Data UP, Down Menu UP, Down External sync signal polarity Setting to factory setting statusShutter mode HD input VD input External Sync Using the unit with external sync signal Setting by the frameSetting by 1H Horizontal phase adjustment 1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetEXT Trig External trigger Fval Lval Dval Ger, there will be an effect on the video 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset PW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Long Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart RGB, 3CCD Specifications Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service