Sync, Option, Data UP, Down Menu UP, Down | Toshiba IK-TF7C instruction

( 5 ) SYNC

When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external sync) automatically.

Move up down		Set by pushing
By pushing		Set by pushing
By pushing		DATA UP, DOWN
MENU UP, DOWN		DATA UP, DOWN
MENU UP, DOWN



	-- SYNC --

MODE	EXT
H PHASE
	0

•Sync system display

•H PHASE -100 to 100

(5. 1) Adjusting horizontal phase

1Set the "→" to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.

2Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.

( 6 ) OPTION

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- OPTION --
BAUD RATE
9600	• Serial baud rate 9600, 19200

(6. 1) Changing serial communication baud rate

1Set the "→" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.

2Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.

Page 21

Image 21

Toshiba IK-TF7C instruction manual Sync, Option, Data UP, Down Menu UP, Down, Adjusting horizontal phase

Contents

Following information is only for EU-member states For Customer Use Safety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty places Table of Contents Components Available selections Preset value Items Controlled by Using on Screen Display Names and Functions Connector Pin Assignments ConnectionStandard Connection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed Meaning Gain Shutter speed mode is E.TRG modeShading Correction OFF Using the Menus Mode Setting by on Screen Display Partial scanning setting Changing each setting in Manu modeMenus Shutter Electronic shutter Changing each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Mode = E.TRG E.TRG = RR Changing each setting in RR modeChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing the manual shading correction setting Changing the shading correction modeChanging master pedestal Changing R pedestal Sync Adjusting horizontal phaseOption Data UP, Down Menu UP, Down External sync signal polarity Setting to factory setting statusShutter mode HD input VD input External Sync Using the unit with external sync signal Setting by the frameSetting by 1H Horizontal phase adjustment 1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetEXT Trig External trigger Fval Lval Dval Ger, there will be an effect on the video 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset PW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD Specifications External Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division

Toshiba IK-TF7C Sync, Option, Data UP, Down Menu UP, Down, Adjusting horizontal phase

Models: IK-TF7C

( 5 ) SYNC

DATA UP, DOWN

MENU UP, DOWN

(5. 1) Adjusting horizontal phase

( 6 ) OPTION

(6. 1) Changing serial communication baud rate