PW SNR Pulse width trigger SYNC-NON Reset | Toshiba IK-TF7C specification

( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET)

The trigger input to CC1 of the DIGITAL terminal develops 1 frame images.

(3. 1) Pulse Width Trigger SYNC-NON RESET Picture Output Timing

(At Time of One-shot or Continuous External VD/Continuous External HD Input)

Trigger*1											Negative polarity mode
Trigger*1

	About 1 ∝s					About 7 ∝s					Positive polarity mode
											Exposure period*2
	Exposure period*2										Exposure period*2
	Exposure period*2

External HD IN*1

External VD IN*1

About 1H

(Internal VD)

RGB data (video interval image)

FVAL

LVAL,

DVAL

28H	(Partial scanning OFF)
38H	(Partial scanning 60fps)	The internal VD falling edge is within the
47H	(Partial scanning 90fps)	exposure period and thus video is not output. *3

*1: Externally input signal

*2: Exposure time = Trigger pulse width + 6 ∝s

(Valid trigger pulse width is 2 ∝s or greater for external trigger shutter operation.)

*3: Video is output at the falling edge of the internal VD following completion of the exposure period.

The video and FVAL/LVAL/DVAL have a paired relationship.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

27

Image 27

Toshiba IK-TF7C instruction manual PW SNR Pulse width trigger SYNC-NON Reset

Contents

Following information is only for EU-member states For Customer Use Safety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty places Table of Contents Components Available selections Preset value Items Controlled by Using on Screen Display Names and Functions Connector Pin Assignments ConnectionStandard Connection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance Outline OFF Shutter speed mode is E.TRG modeGain Shading Correction Using the Menus Mode Setting by on Screen Display Shutter Electronic shutter Changing each setting in Manu modePartial scanning setting Menus Changing each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Changing each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing each setting in Gain WHT BAL White balance Changing R pedestal Changing the shading correction modeChanging the manual shading correction setting Changing master pedestal Data UP, Down Menu UP, Down Adjusting horizontal phaseSync Option External Sync Setting to factory setting statusExternal sync signal polarity Shutter mode HD input VD input Horizontal phase adjustment Setting by the frameUsing the unit with external sync signal Setting by 1H Fval Lval Dval 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing EXT Trig External trigger Ger, there will be an effect on the video 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset PW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Scanning Partial Scanning OFF All pixels scanning Input Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD Specifications External Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division