External Appearance Diagram | Toshiba IK-TF7C manual

11. EXTERNAL APPEARANCE DIAGRAM

[1.73]

	5
	[0.20]
26	[1.02]

2-M3 Depth 3	78
	[3.07]

Unit : mm [inch]

6.312

[0.25] [0.47]

		(AWB)
		DISP
		MENU DATA
34	[1.34]	DC IN 12V	[0.32]
34	[1.34]	8.2	[0.32]
		PAGE

22	[0.87]
	5	56
	[0.20]	[2.20]

4.8 [0.19]

4-M3 Depth 3

2-M2

26	[1.02]	25	[0.98]
	25		25
	[0.98]		[0.98]

19.2

[0.76]

[1.02]

4-M2 Depth 3

∗ inch=mm/25.4

12. BEFORE MAKING A SERVICE CALL

Symptom	Items to be checked
No image	• Is the power supplied correctly?
	• Is the lens iris adjusted correctly?
	• Are the cables connected correctly?
	• Is the shutter mode set correctly?
	• Is the image process equipment set correctly?
Poor color	• Is the monitor adjusted correctly?
	• Is the white balance of the camera adjusted correctly?
	• Is the illumination dark?

Page 35

Image 35

Toshiba IK-TF7C instruction manual External Appearance Diagram, Before Making a Service Call, Symptom Items to be checked

Contents

Following information is only for EU-member states For Customer Use Safety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty places Table of Contents Components Available selections Preset value Items Controlled by Using on Screen Display Names and Functions Standard Connection Connector Pin AssignmentsConnection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance Outline OFF Shutter speed mode is E.TRG modeGain Shading Correction Using the Menus Mode Setting by on Screen Display Shutter Electronic shutter Changing each setting in Manu modePartial scanning setting Menus Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Changing 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing each setting in Gain WHT BAL White balance Changing R pedestal Changing the shading correction modeChanging the manual shading correction setting Changing master pedestal Data UP, Down Menu UP, Down Adjusting horizontal phaseSync Option External Sync Setting to factory setting statusExternal sync signal polarity Shutter mode HD input VD input Horizontal phase adjustment Setting by the frameUsing the unit with external sync signal Setting by 1H Fval Lval Dval 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing EXT Trig External trigger Ger, there will be an effect on the video 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset PW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Long Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning on When Partial Scanning Mode is onPartial Scanning Partial Scanning OFF All pixels scanning Input Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart RGB, 3CCD Specifications Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service