Alarm Operation

The dual alarms in this system give you the option of waking to the radio, an electronic buzzer tone, or your favorite track on your favorite CD.

You may also program one or both of the alarms for weekdays only, weekends only, or everyday operation.

Before activating the alarms first check the settings for Alarm 1 and Alarm 2 and adjust if necessary.

Refer to “Adjusting The Wake Up Times” and “Selecting The Alarm Mode” on pages 14, 15.

Wake To Radio

1.) Tune to the station that you want to wake you up, adjust the VOLUME control to the desired level, and then shut the system ‘Off’.

2.) Slide the ALARM 1 and/or ALARM 2 selector switches, located on the left side panel to the “RADIO” position.

The AL 1 and/or AL 2 indicators will appear in the main display to confirm that the alarms are ‘On’.

3.) At the selected wake-up time the radio will turn on to the selected station. It will play for one hour and then shut off automatically and reset itself for the following day.

To shut the radio off sooner you can press either the POWER ON/OFF button or the appropriate ALM 1 or ALM 2 button on the top panel.

2 6

CKD5809_030706.p65

26

7/3/2006, 14:57

Page 27
Image 27
Emerson CKD5809 owner manual Alarm Operation, Wake To Radio