24.NIGHT LIGHT. Touch this pad to turn on the cooktop/countertop night light. See page 15 for more information.
25.OFF. Touch this pad to turn off the
x&top/countertop light. See page 16 for more information.
Interrupting cooking
You can stop the oven during a cycle by opening the door. The oven stops heating and the fan stops, but the light stays on. To restart cooking, close the door and
Audible signals
Audible signals are available to guide you when setting and using your oven:
l A programmlng tone will sound each
time you touch a pad.
l One long tone signals the end of a Minute Timer countdown.
l Four tones signal the end of a cooking cycle.
l Two tones sound once every minute after an
l Three tones sound if you have made an incorrect entry.
To disable audible signals:
l Touch and hold Number Pad 1 for 4 seconds to disable programming tones.
OR
l Touch and hold Number Pad 2 for 4 seconds to disable all signals.
To turn signals back on:
Repeat steps under ‘To disable audible signals” above.
NOTE: Three tones, followed by two tones, will sound when audible signals are turned on or off.
If you do not want to continue cooking:
l Close the door and the light goes off.
OR
Using the demonstration feature
You can set your microwave oven to demonstrate its functions without turning the oven on.
NOTE: This feature can only be used when the microwave oven is first connected to power. You cannot use the demonstration feature after a Command Pad has been touched.
To set the demo feature:
1.Open the door and keep il open.
2.Touch and hold AUTO START for four seconds. Three tones, followed by two tones, will sound.
3.Release AUTO START.
4.Shut the door to start the demo.
To cancel the demo feature:
Touch OFF/CANCEL.
13