PROBLEM
Microwave :ooklng times seem too long
The Display shows a time counting down but the oven is not cooking
You do not hear the Program- ming Tone
The microwave Dven turns off too soon or not soon enough when using the Temperature
Probe
The Display shows “888:88”
POSSIBLE CAUSE
The electric supply to your home or wall outlets is low or lower than normal.
The Cook Power is not at the recommended setting.
There is not enough cooking time for the amount of food being cooked.
The oven door is not closed completely.
You have set the controls as a minute timer.
The command is not correct.
Probe is not pushed far enough into the food.
Probe is not positioned correctly in the food.
When cooking roasts, you have not let roast stand after cooking.
Probe is not plugged in correctly.
Cook Power is not set correctly.
Probe temperature is not set correctly.
There has been a power interruption.
SOLUTION
Your electric company can tell you if the line voltage is low. Your electrician or service technician can tell you if the outlet voltage is low. See page 7.
Check “Microwave cooking chart” on page 49.
Allow for more time when cooking more food at one time.
Completely close oven door.
Touch TIMER OFF to cancel the Minute Timer.
Reenter command.
Insert at least V3 of probe into the food.
Position probe tip in the center of the food.
Allow roast to stand for a few minutes after cooking.
Plug probe tightly into its socket.
Reset the Cook Power.
Reset the probe temperature.
Reset the clock.
54
