Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired.
NOTE: Programming can only be done while the player is in the Stop mode. If a disc is playing press the 
button to stop playback before performing the programming steps below.
1)Turn the unit ‘On’, to select the CD function by press FUNCTION button repeatedly until the “cd” indicator appear on the display and load the desired disc in the player. Wait until the player reads the disc and the display shows
the total number of tracks.
2) Press the PROG./MEM button. The PROG. | PROG |
indicator will appear and the Number “1” will |
|
show on the display, indicating that you can |
|
select the first track to be programmed. |
|
3)Press the 
or 
buttons to select the first track. The desired track number appears and the track number will blink on the display.
4)Press the PROG./MEM button again. The selected track is entered in the Program memory, as first programmed track. Then display advances to “2” indicating that you can select the next track to be programmed.
5)Repeat Steps 3 and 4 to program up to 20 tracks in the memory.
6)After you have programmed all of the desired
|
|
|
| PLAY | PROG |
tracks press the |
|
|
| button to begin |
|
|
|
|
programmed playback. The PROG indicator remains lit. Playback will begin on the first track you programmed and continue until all
programmed tracks have been played.
As each programmed track starts playing the display will briefly show the track number being played and then return to the correct time.
PLAY | PROG | PLAY | PROG |
|
| AM |
|
NOTES:
•After all programmed tracks have played the player stops but the program remains in the memory.
Press the PROG./MEM button and then the CD PLAY/PAUSE button to begin programmed playback again.
•To clear the programmed tracks from the memory, press the STOP button again or open the CD door,or switching to the Radio function also clears the program. Pressing the POWER/ALARM OFF button will shut the unit ‘Off’,
15
