Battery Back Up System
This unit uses a single CR2032 battery (not included) to maintain the Time, Alarm time and Radio preset stations settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a
Installing and replacing the backup battery
1.) Use screw driver to remove the screw that secures the battery compartment at the bottom of the unit,and move out the battery cartridge from the battery compartment
2.) Insert a new battery in the battery cartridge with " + " side facing up.
3.) Insert the battery cartridge back into the unit and secure it with the screw.
1 | 2 | 3 |
If the power is interrupted the clock display will go off but the battery will maintain the Time, Alarm time and Radio preset stations settings. When power is restored the time display will be correct and the alarm time and preset radio stations will also be maintained.
If you notice that the time is wrong you probably experienced a power failure. This could have been caused by a weak battery. Reset the clock and replace the battery as soon as possible.
NOTE: The battery back up system will not work unless you have installed the battery (CR2032, not included). Please see above for installation.
After you replaced the new battery, it will be necessary to
6
