Wake To RADIO
1.) Turn the radio ‘On’and select the Band, Station, and Volume level that you wish to hear when the alarm comes on, then turn the radio ‘Off’again.
2.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both Alarms.
3.) Set the ALARM selector switch for one or both alarms to the “RADIO”position. The appropriate ALARM 1 and/or ALARM 2 display will change from “OFF”to the selected wake up time.
4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and then shut off automatically.
5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day (depending on the Alarm Mode setting).
6.) If you do not want the alarm to turn the radio on the following day, set the appropriate ALARM selector to the “OFF”position. The respective alarm display will show “OFF”.
14
CKS3020_072706.p65 | 14 |
27/7/2006, 11:35
