Emerson ES28 owner manual Disc Errors, To Stop A Cd Before The Disc Ends, number of tracks

DISC ERRORS

•This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. There are limits, however, to the amount of correction available.

•In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) in the disc being played, which are too large for the error compensation circuits to handle. If you encounter this problem, check the CD player's operation as follows, before having the unit serviced:

Play a new disc. If the CD player operates normally, the skipping problem is probably due to a defective disc.

TO STOP A CD BEFORE THE DISC ENDS
1.) Press the STOP button. Disc play will	POP	5	6	7	8
		1	2	3	4
stop, and the display will show the total		9	10	OVER
	TRACK
number of tracks.	莤莤响

2.) To temporarily stop disc play (Pause mode), press the PLAY / PAUSE button. Disc play will stop at the current play position. The display and the track playing time will flash.

POP

TRACK

1 2 3 4

5 6 7 8

9 10 OVER

莤莤响

3.) To resume disc play, press the PLAY / PAUSE button again.

13

ES28_ib_0321.p65 13

21/3/2002, 11:10