Emerson ES28 owner manual Listening To Programmed Tracks, Mute, Stereo Headphone Jack

•Any track can be programmed to play more than once.

•Repeatedly pressing the PROG / MEMORY button will enable you to check the program if required.

LISTENING TO PROGRAMMED TRACKS

1.) Enter all tracks you want to program into memory following the procedures on page 16.

2.) Press the PLAY / PAUSE button. Disc play will start at the beginning of the first programmed track.

“TRACK MEMORY” indicator appears on the display.

POP	2
	6
9	10

TRACK MEMORY

莤莤响

4

8

TO CLEAR THE PROGRAM MEMORY

•Press PROG / MEMORY button to enter programming mode, then press the STOP button.

•The program memory will also be cleared if the disc compartment is opened, if the function is changed, or if the power is turned ‘Off’.

MUTE

•Press the MUTE button on remote control to switch off the sound, the MUTE indicator will illuminate.

•Press MUTE again to restore the sound to the previous level. MUTE indicator will extinguish.

STEREO HEADPHONE JACK

For private listening without disturbing others connect a set of stereo headphones (not included) to the PHONES Jack on the back panel. The built-in speakers automatically shut off when stereo headphones are connected to the headphone jack. When using stereo headphones always start with the volume control set to a low level and gradually increase until you find the desired level.

17

ES28_ib_0321.p65 17

21/3/2002, 11:10