Emerson ES3 Volume, Bass Level, And Dynamic Bass Boost, D-Basscontrols, Volume Adjustments

4.) Press the TUNING/SKIP-SEARCH UP or DOWN buttons on the top panel of the main unit or on the remote control to set the display to the correct minutes.

5.) Press the MEMORY/CLOCK SET button once more. The time display stops flashing and the clock begins to run.

Note: You must press the TUNING/SKIP-SEARCH UP or DOWN buttons to adjust the time display within 8 seconds after you press the MEMORY/CLOCK SET button, otherwise the digits will stop flashing and the time cannot be adjusted. If this occurs press the MEMORY/CLOCK SET button again to start the display flashing once more.

VOLUME, BASS LEVEL, AND DYNAMIC BASS BOOST

(D-BASS) CONTROLS

Volume Adjustments

Press the VOLUME UP or DOWN buttons on the front panel or the remote control to increase or decrease the volume. The volume level indicator appears in the main display. The range is from “00” ( Minimum) to “40” (Maximum). The system remembers the volume level when the power is switched ‘Off’and returns to the same level when the power is switched ‘On’again.

Dynamic Bass Boost Control

Press the BASS BOOST button on the front panel or the remote control to increase the bass response. The D-BASS indicator appears in the main display. Press again to cancel the Bass Boost function.

Bass Volume Level Control

Rotate this control on the front panel of the subwoofer to increase or decrease the amount of bass response from the subwoofer speaker.

20

ES3_ib032103.p65 20

21/3/2003, 10:31