![](/images/new-backgrounds/1164012/16401237x1.webp)
TV OPERATION
WATCHING A TV PROGRAM
TV/VCR
1Turn on the unit
Press the POWER button to turn on the unit.
2Select the channel number
Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control.
Note for using the Number button on the remote control:
¡You must precede
¡When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press “+100” then press “2” and “5”).
Remember: If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
3Adjust sound
Press the VOLUME button X or Y to adjust the volume.
PICTURE CONTROL
TV/VCR
The unit’s picture controls – BRIGHT, CON- TRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.
Make sure ...
•The unit must be turned on.
1Select “PICTURE CONTROL”
Press the PICTURE button on the remote control.
2Select item you want to adjust
Press the Arrow button K or L until desired control is displayed.
BRIGHT |
|
CONTRAST |
|
COLOR |
|
TINT | BRIGHT |
| – P P P P P P P C P P P P P P P + |
SHARPNESS |
|
3Adjust the picture control
NOTES:
VOLUME 20
C C C C C C C C C C C C
Press the Arrow button { or B to adjust to your desired level.
•If you press the CHANNEL button K or L in the DVD mode, you can change the TV channels.
Even if you turn off the unit in the DVD mode, it will go into the TV/VCR mode when you turn it on again.
DEGAUSSING
TV/VCR
Magnetism from nearby appliances and speakers might affect the color of the TV picture.
If this happens, move this unit away from the appli- ance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later or so.
| Arrow button s | Arrow button B |
|
|
|
BRIGHT | to decrease | to increase |
| brightness | brightness |
|
|
|
CONTRAST | to decrease | to increase |
| contrast | contrast |
|
|
|
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
|
|
|
SHARPNESS | to soft | to clear |
|
|
|
•If there is a power failure of any kind, the unit will retain its memory for this feature.
- 19 - | EN |
1C29