RECORDING

Make sure ...

TV/DVD/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTES:

This TV/VCR/DVD will ONLY record and view the same channel.

This TV/VCR/DVD cannot record the contents from the built-in DVD.

NORMAL RECORDING

TV/VCR

You can ONLY watch the same TV program that is being recorded.

1 Select the channel to be

CH 10

recorded

Press the number buttons on the remote control or the CHANNEL button K or L.

Remember: If the TV/DVD/VCR is connected to a cable box or satellite box, the TV/DVD/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.

2Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

 

SP

3 Begin recording

REC

Press the RECORD button.

SP

4Stop recording

Press the STOP button when recording is completed.

SKIPPING UNWANTED

SCENES DURING RECORDING

TV/VCR

Press the PAUSE button to tem-

PAUSE

porarily stop recording.

 

Press the PAUSE or RECORD but- ton to resume recording.

NOTES:SP

After five minutes, the TV/DVD/VCR will auto- matically switch to the Recording mode to prevent tape damage.

If “CLOSED CAPTION (ON)” is selected, the On- Screen Display will appear for 5 seconds, then dis- appear.

- 30 -

EN

1C29

Page 30
Image 30
Emerson EWC27T3, EWC19T3, EWC19T3, EWC27T3 owner manual Normal Recording, Skipping Unwanted Scenes During Recording