PRESETTING STATIONS IN MEMORY

Up to 10 AM and 10 FM stations can be stored into the Preset memories. They will remain in memory as long as the batteries are installed.

1.) Slide the FUNCTION switch to RADIO position.

2.) Press the BAND button to select AM or FM band, press the or button to tune a station.

3.) Press the MEMORY button – the PROG indicator blinks.

4.) While the PROG indicator is blinking: Press one of the Preset buttons to store that station in Presets M1 – M5. Example: M4.

5.) To store stations in Presets M6 through M10, tune to the desired station, press the MEMORY button, press the M+5 button and then one of the Preset buttons. Example: To store a station in Preset M7, press buttons “M+5”and “M2”.

Note: You must press a Preset button within 5 seconds while the PROG indicator is blinking, otherwise the station will not be memorized.

NOTE: Before you disconnect the power (AC and Battery) of the set, make sure to press POWER OFF button to turn power ‘Off’, then you have approximately 30 seconds to reconnect the power. Otherwise, the memories may be lost and need to be re-programmed.

13

HD7100_ib_0422.p65

13

 

22/4/2002, 11:43