Emerson HD7100 TO RECALL PRESET STATIONS, CONNECTION TO AN EXTERNAL AUDIO SYSTEM

TO RECALL PRESET STATIONS

1.) Set the FUNCTION switch to the RADIO position.

2.) Press the BAND button to select AM or FM band.

3.) Press one of the PRESET buttons to select stations stored in Presets M1 through M5 or press the M+5 Preset button and then one of the Preset buttons to select stations stored in Presets M6 through M10.

4.) To change a preset station, enter a new station into the memory you wish to change. The previously memorized station is replaced by the new station.

CONNECTION TO AN EXTERNAL AUDIO SYSTEM

You can connect this CD player to a home stereo system, receiver, amplifier, or recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection cable is NOT included. Set the DBBS(Bass Boost) switch of this CD player to the “OFF” position. Be sure to follow the external source connection instructions for the other equipment as well.

14

HD7100_ib_0422.p65 14 22/4/2002, 11:43