OPERATING INSTRUCTIONS

NORMAL PLAYBACK

1.) Connect the headphones to the Headphone jack.

2.) Set the VOLUME control to minimum.

3.) Press the CD door OPEN

 

V O L U M E

button to open the CD door. Place

 

 

 

 

your CD on the center spindle,

 

 

label side up and gently press

 

 

down until it is firmly held in place.

 

 

4.) Close the CD door and push down on the “CLOSE” position, to make sure that the door locks properly.

5.) Slide the HOLD switch to the “OFF” position.

6.) Press the PLAY/PAUSE button and the total number of tracks and total playing time will show on the display window. The player will then start playing track 1 automatically. Track number and elapsed playing time are displayed.

7.) Adjust the VOLUME and DBBS (Bass Boost)controls as desired.

8.) When all tracks have been played the player stops and the display shows the total tracks and playing time on the disc. After approximately 1 minute the power shuts off and the display goes blank.

To stop playback before the disc ends press the STOP button at any time. Press the STOP button again to shut the power off immediately.

9.) Press the OPEN button to open the door and remove your disc. Close the CD Door and return your disc to its protective storage case.

7

HD9971_ib_drafts.p65

7

19/4/2002, 15:52

Page 8
Image 8
Emerson HD9971 owner manual Operating Instructions, Normal Playback