Emerson HK250 Redialing a Number, Ending a Call, Adjusting Earpiece Volume, OUT of Range Warning

HK250.O/M.QXD 9/26/02 3:49 PM Page 14

BASIC OPERATION (CONTINUED)

REDIALING A NUMBER CHANNEL SELECTION

11

1

2

Press the TALK button ❶ (the light will come on), followed by the REDIAL button ❷ to automatically redial the last number dialed on this handset (up to 32 digits).

NOTE: Please note that only the last number you called on this handset can be stored in the Redial memory.

The base unit will automatically search for the clearest channel in the Standby mode. However, should you hear static or noise during the course of a conversation which makes it difficult to hear the caller, the CHN (Channel) button on the handset allows you to choose between 40 preset channels.

NOTE: The TALK LED will flash and the unit will sound two beeps to indicate the unit is changing to another channel. The unit will sound an error beep and return to the original channel if it cannot reach a clearer channel.

ENDING A CALL

1

To end a call, simply return the handset to the base, or press the TALK button on the handset; the light will go off.

ADJUSTING EARPIECE VOLUME

1

2

1

To adjust the volume in the earpiece, press the TALK button ❶ and the light will come on. Then, press the REVIEW/ VOLUME /❷ buttons ❷ until the desired volume level is reached.

OUT OF RANGE WARNING

The handset and base communicate up to a maximum range. The distance can be affected by the weather, power lines or other cordless telephones. You are out of range and should move closer when:

•You hear noise or static.

•Pressing the TALK button generates three short beeps.

•Pressing the CID button when a number is displayed generates three short beeps.

•You cannot receive an incoming call.

14