HK250.O/M.QXD 9/26/02 3:49 PM Page 20
BASIC OPERATION (CONTINUED)
EDITING CALLER NAMES
You can edit a name in the caller ID as follows:
1
1 | 2 |
2
Scroll through the calls to select a name to edit by pressing the CID button ❶ and then scroll by pressing
the REVIEW/VOLUME /❷ buttons ❷.
Press the PROG button to select the menu.
3
1 
2
Press the REVIEW/VOLUME button ❶ to start character editing.
Press the ❿ button ❷ repeatedly to move the cursor to the desired character to edit.
4b
TO CHANGE THE CHARACTER: Press the key button to change to a different character (see chart on page 22).
4a
TO ERASE THE CHARACTER: Press the ERASE button; the next character will move one step to the left. Press a desired letter to insert and it will be inserted before the first character.
5
Press the PROG button again to store the new name; “Save ok” will appear in the display for three seconds and a confirmation tone will be heard.
20
