PREPARATION FOR USE
Unpacking And Set Up
•Remove the main unit, the AC adapter, the accessory auxiliary device connection cord, and the 2 iPod® adapters from the carton, and remove all packing material from the main unit. We recommend that you save the carton and packing material in the event that the unit ever needs to be returned for service. Using the original carton and packing material is the only way to protect your unit from damage during shipment.
•Remove any descriptive labels or stickers from the top or front panels of the unit but do not remove any labels or stickers from the back or bottom panels.
•Remove the “dummy iPod® ” display card from the docking area and discard it.
Power Sources
This system is designed to operate on 6 “C” batteries, not included, or on normal 120V AC house current with the included AC adapter. In addition, this unit requires 2 “AA” batteries for the clock and alarm memory back up. We recommend that you use a
Attempting to operate this system from any other power source may cause damage to the system, and such damage is not covered by your warranty.
Battery Precautions
•Replacement of batteries must be done by an adult.
•Do not mix old and new batteries.
•Do not mix alkaline, standard
•The supply terminals are not to be
•
•Exhausted batteries are to be removed.
•Only batteries of the equivalent type are to be used.
•Batteries are to be inserted with the correct polarity.
•Dispose of batteries properly. Do not dispose of batteries in fire. The batteries may explode or leak.
4
iP100_062806.p65
28/6/2006, 9:43
