Emerson iP100 owner manual Using The AC Adapter

Using The AC Adapter

Connect the small female plug of the AC adapter to the DC Input Jack on the back panel. Connect the housing of the AC adapter to your 120V AC outlet.

When the adapter is connected to the unit the AC power source is selected automatically, even if there are batteries in the battery compartment. Note: In order to operate the unit on batteries the AC adapter must be completely disconnected from the DC Input Jack on the back panel.

NOTES:

•The housing of the AC adapter may become warm during operation. This is normal.

•To reduce the risk of electric shock never connect or disconnect the AC adapter while your hands are wet.

Protect Your Furniture

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.

6

iP100_062806.p65

28/6/2006, 9:43