Emerson iP100 owner manual Docking and Charging Your iPod R

Models: iP100

1 18
Download 18 pages 7.44 Kb
Page 11
Image 11

OPERATING INSTRUCTIONS (CONTINUED)

Docking and Charging Your iPod R

This system is designed with the same 30-pin connector found in all iPod R docks. By simply connecting your iPod R to the docking station on the front panel of this system you can play your iPod R through the speakers of this system. And you can also recharge the battery in your iPod R .

Note: Recharging is only possible when you are using the system with the included AC adapter. Your iPod R battery will not be recharged when you are operating this system on battery power.

To accommodate all models of dockable iPod R we have included two different adapter / inserts to ensure that your iPod R will fit properly in the docking station.

Note: We have not provided adapters for the iPod R nano or the 5G iPod R models with video capability. The iPod R docking station in this system follows the Apple Universal Well design. If you are using an iPod R nano or a 5G iPod R with video capability please use the adapter that was supplied with your iPod R . That adapter will fit properly in the docking station of this system.

Refer to the chart below to select the proper adapter / insert for your particular model of dockable iPod R . Note: If you have a earlier non-dockable iPod R , or an iPod R Shuffle, please refer to the next section to connect you device to the Auxiliary Input jack.

iPodR inserts

Your unit comes with 2 removable inserts to ensure your iPod R fits properly in the dock on the front of the system.

 

 

 

 

MENU

 

 

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU

 

 

 

 

 

 

 

 

 

 

 

iPodR

version

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3G

 

 

mini

4G

 

 

photo

 

 

nano

 

 

5G

iPod R size

10

15

20

30 40

4

6

20

40

20

30

40

60

1

2

4

30

60

 

 

GB GB GB GB GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

 

Small

A

A

A

 

A

A

A

 

A

A

 

 

 

 

 

 

 

 

Adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Large

Adapter

Use the adapter supplied

*

*

*

*

*

with your iPodR

 

 

 

1.Place the proper adapter / insert into the docking station. The iPod R 30-pin connector should fit through the opening in the bottom of the insert.

2.Gently press the insert into the dock until it is properly seated.

3.With your iPod R in the Power ‘Off’ mode carefully place it into the insert. Note: Remove any accessory case or “skin” from your iPod R before inserting it in the dock.

4.To remove or replace an insert, first remove your iPod R from the dock. then grip the insert and gently lift it upward and out of the dock.

10

Page 11
Image 11
Emerson iP100 owner manual Docking and Charging Your iPod R