2.) Place your iPod® into the docking adapter. Make sure that your iPod® is fully inserted into the docking adapter and that the HOLD switch on your iPod® is set to the ‘Off’position. Close the splash resistant cover.
If you are operating this system on AC power your iPod® display may come on and show the ‘Charging’or ‘Charged’battery icons.
If you are operating this system on the batteries, you iPod® screen will go blank. The batteries in this system will not charge the iPod’s internal battery.
3.) Press the POWER 
button of this system to turn the power ‘On’ and then press the FUNCTION button to select the iPod® function if necessary.
Your iPod® may begin playing the last song that it was playing before it was turned off, or it may show the Main Menu screen.
If you press the PLAY/PAUSE button on this system with the Main Menu screen on your iPod® , your iPod® will begin playing all of the songs in alphabetical order.
4.) Press the 
/ 
or 
/
buttons on this system to skip back or forward through your iPod® Songs library.
5.) Adjust the VOLUME + / – and
6.) If you want to select a different Album or Artist from your iPod® menu you must use the iPod® click wheel as usual, then use the PLAY/PAUSE button and the 
/ 
or 
/ 
buttons on this system to control the playback of the songs in that particular Album or from that particular Artist.
7.) When you are finished listening press the POWER 
button on this system to shut the power ‘Off’.
If you were using AC power your iPod® will enter the Charging mode.
If you were operating this system on battery power your iPod® will switch ‘Off’.
22
iP105_052207.p65 | 22 |
