NOTE: If you are using either the 30GB or 60GB fifth generation iPod® models with video capability or the 2G (Second Generation) iPod® nano, use the adapters that were supplied with the iPod® at time of purchase. They will fit correctly in the docking cradle of this system.
IMPORTANT!
•If you are using a “1G (First Generation) iPod® nano” you must slide the docking connector to the ‘left’position before inserting the required adapter as shown in the following illustrations:
•If later you decide to install a different iPod® model you must remove the nano adapter from the docking cradle and slide the docking connector back to the ‘right’position before inserting the appropriate adapter.
4.) Slide your iPod® into the adapter and make sure that it slides down as far as possible until it is correctly seated on the iPod® connector.
5.) Press the 
Power button of this system to turn the power ‘On’.
6.) Press the Function button of this system to select the iPod function. The “iPod” indicator appears in the display.
23
iP550_041907.p65 | 23 |
