Emerson kf220tzg00 Operating Your Ceiling Fan, STANDARD WIRING FOR EXISTING 3-WAYCONTROL

Models: kf220tzg00

1 20
Download 20 pages 51.7 Kb
Page 15
Image 15
STANDARD WIRING FOR EXISTING 3-WAY CONTROL

Operating Your BP7307AuthorizedLarissa KF220Emerson1/9/06 Fan8:36 AMDealerP ge 15www.NovaLightingStore.com 800-860-1207

Manual backgroundManual background 9. Place the second wall control into the Manual background wall box. Screw in place and install decorator style faceplate (included). Leave switch in “OFF” mode until fan installation is completed.

Manual backgroundManual background 10. Refer to page 5 and complete the ceiling fan installation .

4.To set the level of light brightness, press and hold the LIGHT button. The light brightness will continue to increase then decrease while the button is held down. When the light is at the desired brightness, release the button.

STANDARD WIRING FOR EXISTING 3-WAY CONTROL

 

 

EXISTING

 

 

HOT

BLK

WALL CONTROL

 

 

 

 

 

 

 

 

 

BLACK

 

TRAVELER WIRES

 

LOAD

 

 

 

 

 

BLK

BLK

 

BLK

HOT

BLK

 

 

 

 

 

 

EMERSON

 

EMERSON

BLACK

FAN/LIGHT

 

 

WALL CONTROL

TRAVELER WIRES

 

LOAD

 

 

 

Manual backgroundManual background 5. To turn the light on and off, press and release the LIGHT button. The light will turn on at the light level previously set (see step 4).

6. If airflow is desired in the opposite direction, turn the fan off and wait for the blades to stop turning. Then slide the reversing switch to the opposite position (Figure 24) and turn the fan on again. The blades will turn in the opposite direction and reverse the airflow.

Figure 22

Operating Your

Ceiling Fan

IMPORTANT

Fan installation must be completed, including the installation of the fan blades, before testing of the remote control.

Your Fan/Light Wall Control (Figure 23) has full control of your fan and light. However, airflow direction is controlled by a slide switch on the switch housing.

Manual backgroundManual background 1. Restore electrical power to the outlet Figure 23 box by turning the electricity on at the

service panel.

NOTE: Make sure that the ON/OFF slide switch on the Fan/Light Wall Control is

in the ON position.REVERSING SWITCH

Manual backgroundManual background 2. To set the desired fan speed, press the HI, MED, or LOW buttons to operate your fan on high, medium, or low speed (Figure 23).

Manual background 3. To turn your fan off, press the OFF Figure 24Manual background button.

15

HI

LIGHT

MED

LOW

FAN OFF

EMERSON®

OFF

 

 

 

 

 

ON

Emerson Fans Available at www.NovaLightingStore.com 800-860-1207

Page 15
Image 15
Emerson kf220tzg00 owner manual Operating Your Ceiling Fan, STANDARD WIRING FOR EXISTING 3-WAYCONTROL