5TV Screen Display Mode, 5Sleep Timer, Letterbox | Emerson LD200EM8

5TV Screen Display Mode

DTV

2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal.

Press [SCREEN MODE] repeatedly to switch the TV aspect ratio.

LETTERBOXZOOM

[LETTERBOX]

Display the digital-supported program in full-screen. Black borders will spread in the upper and lower screen.

[ZOOM]

Enlarge and display the center area of the digital- supported program.

The right and left side of image will be cut off.

Note:

•You may not switch the display mode depending on the program.

5Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

1Press [SLEEP] to set the sleep timer.

SLEEP OFF

• Sleep timer display appears on the TV screen.

2Press [SLEEP] repeatedly to change the amount of time until shut off.

SLEEP 120MIN.

•You can set your unit to turn off after a set period of time (from 30 to 120 minutes).

•Each press of [SLEEP] will increase the time by 30 minutes.

•After set up, the sleep timer display can be called up for checking by pressing [SLEEP].

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until “SLEEP OFF“ is displayed on the TV screen.

Note:

•The sleep timer setting display will automatically disappear in 10 seconds.

•When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION

19

EN

Image 19

Emerson LD200EM8 owner manual 5TV Screen Display Mode, 5Sleep Timer, Letterbox, Zoom, To Cancel the Sleep Timer

Contents

LD200EM8 Important note is located on the rear of the cabinet Introduction Important Copyright Information PrecautionsLaser Safety RADIO-TV Interference 5Symbols Used in this Manual 5Supplied Accessories5Tilt Stand General Specifications ContentsRepeat A-B Playback DTV/TV/CATV Features REV E button p29 5Remote Control Function 5Control Panel 5Rear Panel Connection to Cable Box or Satellite Box Connection5Basic Connection Antenna Cable Connection Component Video Cable Connection 5External Device ConnectionVideo Cable Connection Digital Audio Output Connection Video Connection Scanning and memorizing the channels automatically start Initial Setting5Initial Setup Make sure if the unit is connected to antenna or cable 5Auto Channel Scan 5Main Menu 5Language Selection Press Setup to exitEnglish Español Français Watching TV 5Volume Adjustment5Channel Selection SAP 5Switching Each Mode5Switching Audio Mode Main Program Guide 5Screen InformationPress Display Broadcasting Information Letterbox 5TV Screen Display Mode5Sleep Timer To Cancel the Sleep Timer Brightness Contrast Color Tint Sharpness Optional Setting5Picture Adjustment 5Channel Add/Delete OFF CAPTION1 CAPTION2 TEXT1 TEXT2 Press Setup to display the main menuCaption Mode CAPTION1 and TEXT1 5Closed Caption 5DTVCC Style 5DTV Closed Caption 5Back Light Setting Chip 5Color TemperatureYou can adjust color temperature of the TV screen Change Password To Set the Sub Ratings TV Rating Mpaa Rating Change PasswordUse Cursor K/L to select Change PASSWORD, then press Enter Enter password again in Confirm PASSWORD. space Any other discs without compatibility indications Operating DVDDVD Functions 5Playable Media 5Unplayable Media Pause Playback5DVD Menu 5Resume Playback 5Zoom Step-by-step Playback5Fast Forward / Fast Reverse 5Slow Forward / Slow Reverse 5Search Functions During playback, press Mode repeatedly until appearsChapter / Title Search 5Repeat A-B Playback Time SearchDirect Search 5Repeat Playback Press Play B to start random playback Stop mode, press Mode repeatedly until Random menu appears5Programmed Playback 5Random Playback Introduction 5On-screen Display Camera Angles 5Special SettingsSubtitle Language Audio Language Virtual Surround Black Level SettingStereo Sound Mode Use Cursor K/ L to adjust the black level To set a marker Marker Setup Audio *1, *2 DVD Setting5DVD Language Setting Enter Use Cursor K/L to select DVD SETUP, then press Enter 5Display SettingUse Cursor K/L to select CUSTOM, then press Enter Use Cursor K/L to select AUDIO, then press Enter 5DVD Audio Setting Use Cursor K/L to select Parental LEVEL, then press Enter 5Parental SettingUse Cursor K/L to select PARENTAL, then press Enter Parental Level You can change the other functions OthersUse Cursor K/L to select OTHERS, then press Enter Use Cursor K/L to select YES, then press Enter 5Reset to the Default Setting5Language Code List Use Cursor K/L to select INITIALIZE, then press Enter 5Troubleshooting Guide Troubleshooting Entered channel number Check the batteries of the remote controlRefer to IR Signal Check on Delayed behind the dialogue Atsc MaintenanceInformation Glossary 5Cable Channel Designations 5General Specifications5Electrical Specification 5Other Specifications Memo Limited Warranty