Emerson LD200EM8 owner manual 5Switching Each Mode, 5Switching Audio Mode, Main, Sap, Mono

5Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit.

1Press [INPUT] repeatedly to cycle through analog TV, digital TV, VIDEO1 and VIDEO2.

[ANALOG MODE]

[DIGITAL MODE]

[VIDEO1]

[VIDEO2]

•To use the video or S-video input jack on the unit, select “VIDEO1”.

•To use the component video input jack on the unit, select “VIDEO2”.

Note:

•When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode.

NOW SCANNING

5Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

TV

While receiving an MTS broadcast, press [AUDIO] repeatedly to cycle through the available audio channel.

		[MAIN]
		[SAP]
		[MONO]
MAIN
	: Outputs main-audio
SAP	: Outputs second audio program
MONO	: Outputs mono-audio

•The current mode will automatically disappear in 10 seconds.

DTV

1Press [AUDIO] to display the currently selected language and the number of available languages.

KABC CH 95-03

A Day of Memories

ENGLISH 1/3

2Press [AUDIO] repeatedly to cycle through the available audio languages.

[ENGLISH]

[SPANISH]

[FRENCH]

•Available languages differ depending on the broadcast.

•The current mode will automatically disappear in 10 seconds.

Note:

• Pressing [AUDIO] does not control external audio device.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION

17

EN