PREPARATION FOR USE
UNPACKING AND SET-UP
•Carefully remove the main unit, speakers, and remote control from the carton, and remove all packing materials from the components.
•Remove any descriptive labels or stickers from the front panel of the main unit. Do not remove any labels or stickers on the back panel of the main unit or the speakers.
•Carefully remove any small strips of tape that may have been used to hold the CD door closed during shipment.
•· Unwind the AC power cord on the main unit and extend it to its full length.
•Unwind the lead wire FM antenna on the back of the main unit and extend it to its full length.
•Please save the carton and packing materials in case it ever becomes necessary to return your unit for service. The original carton and packing materials are the only way to protect your unit from damage in transit.
•Place the system on a stable, level shelf, table, desk or stand, out of direct sunlight, convenient to a 120V 60Hz AC outlet, and away from sources of excess heat, dust, moisture or humidity.
POSITIONING THE MAIN UNIT AND SPEAKERS
The main unit and the speakers are designed to be used on a shelf, desk, table or stand. The main unit is shipped with two plastic legs installed for added stability when the system is used on a flat surface. These two plastic legs allow the main unit to “lean backward” slightly and prevent it from tipping forward when the CD door is opened.
IMPORTANT: THESE TWO PLASTIC LEGS MUST REMAIN ON THE MAIN UNIT FOR
4
MS3103_ib012803.p65 | 4 |
28/1/2003, 11:36
