Emerson MS3103 owner manual Listening To The Radio, Tuning-inA New Radio Station, Automatic Tuning

LISTENING TO THE RADIO

Tuning-in A New Radio Station

Pressing TUNER/BAND button selects radio operation. The display indicates the tuning frequency. At the left of the display, the band is indicated: FM or AM. Pressing the TUNER/BAND button changes the band.

After selecting the required band, you can tune to a radio station in either of the following ways:

Automatic Tuning

•To search up or down the band for a station, hold in or button for 2 seconds then release. The tuner will search up or down until it finds a strong station and stop on that station. Repeat until you find the desired station.

Manual Tuning

•To change frequency one step at a time, repeatedly press and release or

button until the frequency of the desired station appears on the display.

You can keep any new station you’ve tuned-in by storing it in the memory.

(see following page)

Note: For best FM reception, position the lead wire FM antenna for least interference. (Note if AM reception is poor, you may need to rotate the unit.)

16

MS3103_ib012803.p65 16

28/1/2003, 11:36