6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
When the memory is full, the “– – ”indicator flashes in the display.
7.) To begin programmed playback press the 
PLAY/PAUSE button.
The display will show the first programmed track and playback will begin on that track.
The MEMORY indicator remains ‘On’.
After the last programmed track has played the player stops but the programmed tracks remain in the memory.
To play the programmed tracks again, press the PROG./CLOCK button and then
the 
PLAY/PAUSE button.
To cancel the programmed sequence from memory, press the 
STOP button at programming mode, or open the CD door.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 5 on page 17.
When Programmed Playback begins, press the PLAY MODE button twice to activate the “All Tracks Repeat” feature.
The REPEAT Indicator lights and all the tracks in your programmed sequence will be repeated continuously.
To cancel Programmed Repeat Playback press the 
STOP button until both the MEMORY and REPEAT Indicators go ‘Off’.
18
MS7618R_062205.p65 | 18 |
22/6/2005, 15:09
