5.) The player will read the Table of Contents and the display will show the total number of tracks on the disc.
If the disc is damaged or up side down, display will show “ – – ”.
6.) Press the 
PLAY/PAUSE button to begin playback on Track “01”.
The 
indicator lights up.
7.) Adjust the VOLUME control as desired.
8.) Playback will continue until the end of the disc. When the disc ends the display again shows the total number of tracks on the disc.
You may also stop playback at any time by pressing the 
STOP button.
Pause Control
To pause momentarily during playback press the 
PLAY/PAUSE button again.
Playback stops but the disc continues to spin and the 
indicator flashes.
Press the 
PLAY/PAUSE button once more to cancel Pause and resume playback. The 
indicator stops flashing.
Skipping Tracks and High Speed Music Search
During CD Playback, repeatedly press the 
SKIP FWD or 
SKIP REV buttons to skip to higher or lower number tracks. When the desired track number appears on the display, release the buttons and playback will begin on the desired track.
To rapidly search forward or back within a track to locate a specific musical passage,
depress and hold either the 
or 
buttons.
15
MS7618R_062205.p65 | 15 |
22/6/2005, 15:09
