CASSETTE OPERATION
PLAYING CASSETTE TAPES
1.) Press the POWER button to turn the system ‘On’. The POWER ON indicator lights.
2.) Slide the FUNCTION selector to the ‘TAPE’position.
3.) Press the STOP/EJECT key to open the cassette door.
4.) Insert a prerecorded cassette into the slots on the door with the exposed tape facing down and the full reel on the left side. Close cassette door.
5.) Press the PLAY key to begin playback.
6.) Adjust the VOLUME, and
7.) When the tape ends the Automatic Stop System releases the PLAY key and shuts off the tape motor. Press the STOP/EJECT key to open the cassette door and remove your tape. To stop the tape before it ends press the STOP/ EJECT key at any time.
F. FWD (Fast Forward) and REWIND CONTROLS
Press F. FWD key or REWIND key to advance or rewind the tape rapidly. When you reach the desired portion, or the end of the tape, press the PLAY key to resume normal playback, or press the STOP key to shut off the tape motor.
Note: the Automatic Stop System does not function in the fast forward or rewind modes.
PAUSE CONTROL
Press the PAUSE key to stop the tape temporarily. The tape movement stops but the tape motor continues to run. Press the PAUSE key again to cancel pause mode and resume normal playback.
23
MS9700_ib021903.p65 | 23 |
19/2/2003, 9:23
