Emerson MS9700 owner manual Operating Instructions, Sound Controls, Volume, X-Bassboost Button

OPERATING INSTRUCTIONS

SOUND CONTROLS

VOLUME

Press the VOLUME UP or DN (Down) buttons on the front panel, or on the remote control to increase or decrease the volume level. The system memory remembers the volume level when the power is shut off and automatically returns to the same level when the power is switched on again.

X-BASS BOOST BUTTON

Press the X-BASS (Bass Boost) button ( ON) on the front panel to enhance the bass response. Press again ( OFF) to cancel X-BASS boost.

Use X-BASS when you are listening at low volume levels where the bass tends to disappear.

•If you are listening to music with heavy bass at high volume and the X-BASS

ON, you may experience some distortion.

•If this occurs, switch the X-BASS OFF, or reduce the volume level.

SURROUND (STEREO WIDE) BUTTON

Set the SURROUND button to the ‘On’position ( ON) for an expanded stereo/ surround effect. This causes a very slight delay in the sound coming from one of the speakers and creates a feeling of added width and depth. Set the SURROUND button back to the ‘Off’position ( OFF) to restore normal stereo sound.

Note: The SURROUND button only works with stereo sound sources. You will not get any ‘Surround Effect’from mono AM radio, or other mono sound sources.

13

MS9700_ib021903.p65 13

19/2/2003, 9:23