TO BEGIN CD PLAYBACK
After you have loaded up the 5 CDs in the changer:
1.) Press the PLAY/PAUSE 
button to begin playback. The changer will search for the first available disc in the tray and will begin playback from Track 1 on the first disc.The number of the disc being played flashes on the display. It will continue playing until it has played all of the discs in the tray and then stops automatically.
NOTE: To begin playback from a specific disc, press the “CD/DISC SKIP”
button to select the desired disc, and then press the PLAY/PAUSE 
button. Or, press the appropriate disc button ( DISC 1, DISC 2, DISC 3, DISC 4, DISC 5.) for the disc you wish to start. Playback will begin on Track 1 of the selected disc. It stops automatically after finished playing all discs.
2.) Adjust the “VOLUME” control ‘Up’or ‘Down’as desired.
3.) To temporarily stop playback, press the PLAY/PAUSE 
button again. The “II” indicator appears in the display. The disc continues to spin, but no sound
is heard. Press the PLAY/PAUSE 
button once more to cancel pause and resume playback.
4.) To stop playback before the end of a disc, press the STOP 
button.
IMPORTANT
If the disc is smudged or scratched it may skip or stop completely. This does not indicate a problem with the player. If this occurs, try playing another disc. If that disc plays properly, you may assume that the first disc is damaged and unplayable.
11
MS9923TT_ib_0416.p65 | 11 |
| 16/4/2002, 14:17 | |
|
|
|
|
|
|
|
|
|
|