Emerson MS9923TT PROGRAMMED CD PLAYBACK, Entering A Program

You can program the CD changer to play up to a total of 40 tracks on all 5 discs in any desired order.

NOTE: You can not program the CD changer during playback. If a disc is playing press the STOP button first and then follow the instructions.

• Press the “MEMORY” button once. The MEMORY, the track number indicators will flash in the display.

•Press the “CD/DISC SKIP”button or

one of the five disc buttons to select the disc which contains the first track you wish to program.

Example: Disc 2.

• Press the or Track Skip buttons to select the first track you wish to program.

Example: Track 8.

•Press the “MEMORY” button again

to store the desired disc and track num ber into m emory location Number 1. The display will change from Program Number 01 to Program Number 02.

• Use the “CD/DISC SKIP” button or one of the five disc buttons to select the disc containing the next track you wish to program.

Example: Disc 3.

• Press the or Track Skip buttons to select the next track you wish to program.

Example: Track 18.

•Press the “MEMORY” button again to store the desired disc and track into memory location Number 02.

Repeat the above procedure until you have stored up to 40 tracks in the program memory and “FULL” appears in Display.