After all your desired tracks are programmed you may press the “MEMORY”button to reconfirm that the information has been stored correctly. The display will show you which disc and track number you have entered into program memory Number 1. Each time you push the “MEMORY” button the display will show you which disc number and track number is stored in each successive memory location.

PROGRAMMED PLAYBACK

After you have stored and confirmed the program information, press the

PLAY/PAUSE button to begin programmed playback. Playback will start at the first disc and track which you have programmed and will continue until all programmed discs and tracks (up to a total of 40) have been played.

NOTE: If you press the or Skip buttons during programmed playback, the player will skip forward or back to the next track and disc which you have programmed, not the next track on the disc which is being played.

TO CLEAR THE PROGRAM MEMORY

If the disc is playing, press the STOP button to stop the discs. Then press the STOP button again to clear the program memory.

REPEAT FUNCTION

This system has a four-way repeat function which allows you to continuously repeat one track, one disc, all discs, or all of the tracks which you have programmed.

1.) ONE TRACK REPEAT

• Press the “REPEAT” button until the REPEAT Indicator appears in the CD

ONE

display.

•Use the “SKIP” buttons (and the “CD/DISC SKIP” button, if necessary) to select the exact track that you wish to repeat.

•Press the PLAY/PAUSE button to begin one track repeat. The selected

track will begin playing. It will repeat continuously until REPEAT f u n c t i o n i s

cancelled.

ONE

 

14

MS9923TT_ib_0416.p65

14

 

16/4/2002, 14:17