OPERATION PROCEDURE
This Section Includes Useful Information About Oven Operation
1.Plug the power supply cord into a standard
2.After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray and roller guide must always be in place during cooking.
3.Shut the door. Make sure that it is firmly closed.
1 | When the oven door is opened, the light turns off. This is |
| standard procedure for the oven. There are no microwaves |
| being produced when the door is open. |
2 | The oven door can be opened at any time during operation by |
| pressing the Door Release button on the control panel. The |
| oven will automatically shut off. To restart the oven, close the |
| door and then press the START pad. |
3 | Each time a pad is touched, a beep will sound to acknowledge |
| the touch (except Child Lock feature). One of the function |
| pads must be touched before the number pads. Therefore, no |
| beep will sound if a number pad is touched before the function |
| pad. |
4 | The oven automatically cooks on high power (PL 10) unless |
| set to a lower power level. |
5 | The display will flash “0:00” when the oven is first plugged in. |
6 | The display shows “End” when the oven turns off. To return to |
| the time of day, touch the CLEAR/PAUSE pad or open the |
| oven door. |
7 | When the CLEAR/PAUSE pad is touched during oven |
| operation, the oven stops operating and all information is |
| retained. To erase all information (except the present time and |
| memory data), touch the CLEAR/PAUSE pad once more. If |
| the oven door is opened during operation, all information is |
| retained. |
8 | If the START pad is touched and the oven does not operate, |
check the area between the door and the door seal for obstructions and make sure the door is closed securely. The oven will not start cooking until the door is completely closed or the program has been reset. Make sure the Child Lock feature is not turned on.
9 CHILD LOCK
This safety feature prevents unwanted or unauthorized use by small children or other people.
1.To lock the oven, touch the number pad “0” once and then press the START pad five times. The display will show “L OC” and the oven will not operate.
2.To unlock the oven, repeat the above procedure. The oven display will return to the present time.
10 BEEP TONE
When a correct pad is touched, a beep tone (0.2 seconds long) will be heard (except with Child Lock feature). If a pad is touched and no beep tone is heard, the unit has not, or cannot accept the instruction(s).
At the end of the last cook cycle, the oven beeps 5 times, turns off automatically and “End” appears in the display window.
11 DOOR RELEASE
Opening the door during cooking will stop any cooking process without cancelling any program. Cooking resumes as soon as the door is closed and the START pad is touched.
12 TO CORRECT ANY IMPROPER PROGRAM ENTRIES
A)Touch the CLEAR/PAUSE pad.
B)Repeat the desired program entry from the beginning.
C)Any erroneous entries will cause the display to show “Err” (error) when the START pad is touched.
Make sure the oven is properly installed and plugged into the electrical outlet.
7
