Emerson NGA 2000, NGA2000 manual 131

6.2.4 Service Menus

Analyzer Module History

Main Menu — Technical level configuration

				↓
			Service menus
				↓
			Service history
				↓
		Analyzer module history
				↓
CLD							95.0 ppm
	Analyzer module service history
Manufacturing date:						08.01.1998
In service date:						08.01.1998
Last zero calibration date:						02-27-98 13:50
Last span calibration date:						02-27-98 14:01
Total hours of operation:						229.3		hours
Converter installation date:								8/1/98
Converter hours of operation:						229.3		hours
Last service date:						10-02-1998 17:32
List notes...
Add service date!
HOME	ESCAPE		NEW CONV					INFO
F1	F2	F3	F4		F5

In the menu "Analyzer module service history" you will find the manufacturing date and the service date of the CLD analyzer module. In the line "Last service date" you can set up the actual date of maintenance. You only have to press the ENTER key in the line "Add service date!" and the actual date will appear in the line "Last service date".

Caution: Do not press the F3 key (NEW CONV) !

With the F3 key you will load the data of the Master-EPROM ! All stored data will be deleted !

Set up parameters:

¨Select the line "In service date", the line "List notes..." or the line "Add service date!" with the − -key or the ↓ -key.

¨Press the ENTER key or the → -key to select the variable, to start the function or to change to the submenu.

¨Select any digit with the ← -key or the → -key and adjust a new value with the − -key or the ↓ -key.

¨Confirm the new value with the ENTER key or cancel and go back to the last value with the F2 key.

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

NGA 2000 6 - 23