Emerson NGA 2000, NGA2000 manual 129

6.2.3 Service Menus

Control Module History

Main Menu — Technical level configuration

				↓
			Service menus
				↓
			Service history
				↓
		Control module history
				↓
CLD							95.0 ppm
	Control Module Service History
Manufacturing date:						16.11.1997
In service date:						16.11.1997
Last service date:				08:39:55		09 Feb 1998
List notes...
Add service date!
HOME	ESCAPE						INFO
F1	F2		F3	F4		F5

In the menu "Control Module Service History" you will find the manufacturing date of the control module and the date since the control module is in service. Besides, you can find the last service date in the corresponding line. After service is done you can set up a new service date with the function "Add service date!". The new date will appear in the line "Last service date:" after you will have changed to the single component display.

Set up parameters:

¨Select the line "In service date:", the line "List notes..." or the line "Add service date!" with the ↓ -key or − -key.

¨Press the ENTER key or the → -key to select the variable, to start the function or to change to the submenu.

¨Select any digit with the ← -key or the → -key and adjust a new value with the − -key or the ↓ -key.

¨Confirm the new value with the ENTER key or cancel and go back to the last value with the F2 key.

Menu line "List notes...":

Via the line "List notes..." you can change to the submenu "Control Unit Service notes" where you can give in a short note about the service you have done:

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

NGA 2000 6 - 21