6.3.2 Diagnostic Menus

Analyzer Module Diagnostics

Main Menu — Technical level configuration

↓

Diagnostic menus

↓

Analyzer module diagnostics

↓

CLD

95.0 ppm

Analyzer Diagnostics

Power supply voltages...

Primary variable parameters...

Physical Measurements...

Temperature control parameters...

Flow control parameters...

Miscellaneous control parameters...

Trend display control...

Software diagnostics...

Alarm messages valid for:FAILURE

Start up analyzer...

NOx converter efficiency...

HOME

ESCAPE

 

 

INFO

F1

F2

F3

F4

F5

From the menu "Analyzer Diagnostics" you can change to several submenus, where you can set up and control some measurement parameters and calibration parameters of the CLD analyzer module.

Set up parameters:

¨Select any menu line or the line of variables "Alarm messages valid for" with the − -key or the ↓ -key.

¨Select the variable or change to the submenu with the ENTER key or the → -key.

¨Select the parameter with the − -key or the ↓ -key.

¨Confirm the new value with the ENTER key or cancel and go back to the last value with the F2 key.

Line of variables "Alarm messages valid for":

Options:

·FAILURE

·SAFETY FAILURE

·ANY

·WARNING

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

NGA 2000

6 - 27