System Calibration

A further general parameter is "Timeout for Gastest". It is located in the menu "Test procedures".

Expert controls and set up...

↓

System Calibration...

↓

Calibration/Test Procedures...

↓

Test procedures...

↓

Test Procedures

 

Gastest of specific module:

Sample-Gas

Timeout for gastest (0 = no timeout):

180 s

Choose specific analyzer module...

Procedure time:61 s

Analyzer-module:MLT/CH3

SCTESTGAS SCTIMEOUT

SCSTEPMOD

This parameter is related to the possibility to activate a gas valve of a specific module for test purposes. Here we can determine a time after which an activated gastest automatically switches back onto SAMPLE-GAS.

Is this parameter set to "0" no automatic back switching is done.

Supplement - 12

NGA 2000

90003749(1) [NGA-e (CLD-Software 2.3/MLT-Software 3.1.X)] 04/98