CLD | | | | 95.0 ppm |
| | Analyzer Modules | |
| | | NGA Control module |
| | | | CLD |
EXPERT | BACK | >>> | <<< | INFO |
F1 | F2 | F3 | F4 | F5 |
¨Go to the line you want with the − -key or the ↓ -key. If there are more than eight source modules available you have to press the F3 key to go to another menu page.
¨Select the tag of the module with the ENTER key or the → -key:
The display will go back to the menu "DIO-MODULE INPUTS" automatically. The tag of the module selected will appear in the line "Signal comes from".
3) Select any function:
¨Change to the line "Choose function..." with the ↓ -key.
¨Press the ENTER key or the → -key to change to the submenu "FUNCTIONS":
- FUNCTIONS -
AM:Zero-Cal
AM:Span-Cal.
AM:Range-1
AM:Range-2
AM:Range-3
AM:Range-4
SYS:Zero-Cal
SYS:Zero/Span-Cal
EXPERT 
BACK 
>>> 
<<< 
INFO
¨Go to the line you want with the ↓ -key or the − -key. With the F3 key you can go to other menu pages containing further available signals:
·SYS:Program-Cal
·SYS:Cancel-Cal
·SYS:CAL-Test-Mode
·SYS:AM-Zero-Gas
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
